4" Steel Hose Mender Camlock Size_ 1 1/4 inch 5" marine hose is coupled

5" marine hose is coupled with brass NPSH threads

Type "AA" aluminum 5 inch male camlock (Cam & Groove) coupler to 6 inch male camlock (Cam & Groove)

Equivalent part number - HA2520T

Our double jacket mill hose is for industrial and construction locations where medium water pressure is used

For use up to 175 PSI (water only) at 70° F

4" Steel Hose Mender Camlock Size_ 1 1/4 inch 5" marine hose is coupledThe hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or