Amana Tool 45 Degree Laminate Miter Joint Under-Cut Assembly Router Bits Option:55314 - 1-3/8 Dia x 1/4 x 1/2 Inch Shank Titanium (up to 40HRc Hardness)

Titanium (up to 40HRc Hardness)

Once the bit height is properly set

reducing time and aggravation and creating a finish that normally require hours of difficult hand filing

Biscuit joining is one of the easiest and most economical methods of wood joinery

It features the flat-top grind for cutting with the grain efficiently

Amana Tool 45 Degree Laminate Miter Joint Under-Cut Assembly Router Bits Option:55314 - 1-3/8 Dia x 1/4 x 1/2 Inch Shank Titanium (up to 40HRc Hardness)Eliminate that dark line at the edge of a counter or other laminate covered surface. With this bit assembly, the laminate cemented to the substrate can be trimmed and mitered in one pass. Then a pre mitered edging strip can be applied. The resulting seam is clean and crisp. Not intended for use in a laminate trimmer. a. Laminated top is 'under cut', as shown. b. Apron laminate is pre cut at 45. c. Adhere pre cut laminate for a perfect fit. A fine file