Omega 13200 Toe Jack | 10 Ton OTC4467 The EB-300 is considered a

The EB-300 is considered a compression bender as it uses one large hydraulic ram to push the inside radius die into the compression assisted outside counter dies

The AC1234-4 is a fully automatic ACS machine that meets or exceeds SAE J2927 and J2843 standards for 1234yf recovery

Round at 45 Degrees | 2-3/4"

Pivot the axle or rotate it within it's holder to facilitate easy access to the part on which you are working or painting

4" Jaw Clamp On

Omega 13200 Toe Jack | 10 Ton OTC4467 The EB-300 is considered aOmega 13200 10 Ton Toe Jack Features: Heat treated and chromed medium carbon steel cylinder Chrome plated ram guarantees longer seal life and optimum performance Hydraulic system is protected from internal damage by a patented by pass mechanism Rotating pumping socket for multi directional use Dual lift points Specifications: Model 13200 Capacity 10 Ton Minimum Toe Height 1 1 8" Maximum Toe Height 6 1 4" Minimum Head Height 11" Maximum Head Height 16