TruaCut Tungsten Carbide Cutter 135° to give 45° Bend in Aluminium Composite Panels TC13545F Size:118mm Specifications Groove Depth: 0-50mm

Specifications Groove Depth: 0-50mm

A Center Finder for locating centers on shafts and circles

Some tools are best sharpened with the stone running towards the edge and other tools should have the stone running away from the edge

Fully compatible with the 18V XR and XR FLEXVOLT range of batteries (not included)

With plug it-mains adapter as a sanding machine with an unlimited running time during continuous electrical operation – ideal for use indoors in combination with a Festool mobile dust extractor

TruaCut Tungsten Carbide Cutter 135° to give 45° Bend in Aluminium Composite Panels TC13545F Size:118mm Specifications Groove Depth: 0-50mmV shaped or rectangular grooves are routed into the rear side of the Alucobond composite panels with blade cutters or form bits. The aluminium cover plate on the front side and a part of the core material are left standing. The remaining material is thin enough to permit folding by hand. A folding machine is not required. The groove shape determines the bending radius. Features Cutter 135 to give a 45 sheet bend without distortion Ideal For Creating a