Growlink Batch TankLINK Temperature Sensor chemdose then trims pump runtime to

then trims pump runtime to land the exact injection volume each dose calls for

5%+ Isobutane <1500 ppm Neo-pentane <550 ppm Propane <500 ppm Isopentane <20 ppm Ethane <10 ppm Water <3 ppm Oxygen <3 ppm Nitrogen <10 ppm Sulfur Non-detected Odorant None - no ethyl mercaptan Tank DOT refillable LP

or any other US Territory outside of the contiguous 48 States

daisy-chains with other UIS lights

you can effortlessly measure even in hard-to-reach locations

Growlink Batch TankLINK Temperature Sensor chemdose then trims pump runtime toReal Time Nutrient Reads with the Growlink Batch TankLINK Temperature Sensor The Growlink Batch TankLINK Temperature Sensor reads nutrient solution temperature directly inside a batch tank or reservoir. The probe ties into the Batch TankLINK controller's screw terminal block. It reports continuously at 0. 02F resolution with 3. 6F (2C) accuracy. The controller itself operates from 50 to 122F. That range covers the 6872F target band most hydroponic