3/8” All-Flo Air Diaphragm Pump 9 gpm for Softwash KE038B3 25 PACK Install the regulator using the

Install the regulator using the arrow pointing to the pump >>>>>

Deluxified lances have a quick connect socket installed on the high pressure out and a soap nozzle on the low pressure outlet

Do not use Teflon tape because it is much easier to over-tighten the fitting causing a compromise to the integrity of the fitting

Flow range: 2

The pressure washer should have a plug on the outlet or it is plumbed backwards and you will blow out O-Rings

3/8” All-Flo Air Diaphragm Pump 9 gpm for Softwash KE038B3 25 PACK Install the regulator using thePressure Washer Products is proud to offer the All Flo 3 8" Kynar air diaphragm pump assembled in the United States of America for PWP for use specifically with soft wash chemicals. This is a great pump for those who need to pre treat and post treat. This is the only pump on the market that will allow the operator to fully control the flow by using any nozzle size suitable for the job. You can pair this with a little compressor. The fleet washer, soft